The LIFTX Lift Station Monitor saves time and fuel costs by providing real-time status and alarms for your remote lift stations. Connect sensors such as: high/low level, pressure/flow, pump statistics, generator switch-over, power outage, and even site/building security and the integrated cellular connection and WebAdvantage digital platform provides alerts/alarms, dashboard statistics, custom reporting capabilities and access to settings.

LIFTX comes complete with the first 12-months of cellular service for easy start-up and web connectivity, as well as Web Advantage for the life of the instrument.

• Integral Cellular Connection
• Alerts Operators with Customized Alarm Settings
• Customizable Data Field Names
• 5 or 10 Digital inputs
• WebAdvantage Dashboard, Settings and Reporting Capabilities
• Customizable Notepad Entries for Site Visits
• Optional (4-8) 4-20mA Sensor Inputs
• Optional (up to 4) 4-20mA Outputs
• Optional Relay Control
• Easy User Interface and Includes a Keypad & Display at the Site

Specifications

• Electrical Input: 95-240 VAC, 50/60 Hz
• Relay Outputs: Dry contact relays pass through current is limited to 2.5A at 28 VDC.
• Display: 240 X 128 Graphic LCD
• Digital Inputs: From open collector/open drain output or a dry contact. Inputs have 10K Ω pullup to 3.3 VDC.
• Flow Totalizing Inputs: From open collector/open drain output or dry contact. Inputs use 10K Ω pullup to 5 VDC with a max input rate of 2.5 KHz.
• mA Inputs: Optical isolation, 250 Ω / 5 VDC @ 20 mA. Loop voltage to not exceed 30 VDC.
• mA Outputs: With non-isolated 12 VDC power from unit max load = 400 Ω. With isolated external 24 VDC power supply, max load = 800 Ω.
• Enclosure: Heavy duty NEMA 4X style high impact ABS with padlockable gasketed Lexan cover.
• Environment Ambient temperature: 0° to 125°F (-17 to 52°C)
• Relative humidity: 0 to 100%
• Shipping Weight: Approximately 11 lbs. (4.99 kg)

Build a Model

The model number starts with LIFTX followed by the desired options (Example LIFTX-N4)

Options

• A24 - 24 VDC power supply for mA inputs
• D - (5) dry contact relay output
• L - (5) additional digital alarm inputs
• N4 - (4) 4-20mA isolated inputs
• N8 - (8) 4-20mA isolated inputs (not available with option)
• O4 - (4) 4-20mA isolated outputs (not available with option)
• R - Adds 5 control relays, 120 VAC with pigtails plus an ON/OFF switch on the side of the unit, and mounts cell router in external enclosure
• S - Delayed cell service start (up to 4 months)
• S1 - AT&T™ service instead of Verizon™ (no delay start available)
• S2 - Cell router only, with no 12 months of data or SIM card
• W4 - (4) totalizing flow meter inputs with volume tracking and alarming

Connect commercially available sensors to provide:

• Wet well level measurements
• Pressure/flow
• Pump statistics (run-time, amp draw, etc)
• Power outages/generator switchover
• Gas detection (H2S, etc.)
• Building or gate security
• Other parameters or inputs using digital or 4-20mA inputs
• Add control functions using 4-20mA or relay options

Notes:

1. Base LIFTX units have 5 digital inputs, a built-in cell router and 12 months of data.
2. All units include 10 customizable notepad fields for manual reading test entry. These entries can generate alarms and are stored historically for graphing and reporting.
3. All units come standard with conduit connections for incoming power.
4. All required sensors must be sourced separately.